If you’re planning a DIY dual-battery installation, you may find that your battery’s overly crowded terminals are the first obstacle. This is especially true if your vehicle already has a stack of 12V accessories drawing power from the cranking battery.
Instead of trying to squeeze an additional cable onto an already messy battery terminal, the safest, easiest and most practical solution is to just replace your factory-fitted terminals with National Luna’s Multi-Terminal replacement.
Amongst National Luna’s 200+ accessories, the Multi-Terminal is one of our top-selling products.
It takes less than a few minutes to swop out the old terminal clamps for the National Luna replacement, and once you’re done, you’ve got plenty of space for your newly installed dual-battery cables.
The National Luna Multi-Terminal upgrade is a no-brainer replacement that will not only make your dual-battery installation easier, it will also pave the way for any future 12V installation, such as…
- Adding additional 12V plug points
- Installing a winch
- Wiring a built-in air compressor
- Fitting spotlights or a powerful work light
- Installing a battery monitor
- And much, much more
The National Luna Multi-Terminal is available at leading 4×4 and outdoor stores nationwide.
Click Here to find your nearest distributor.
PLEASE NOTE: These are suitable for standard SAE battery posts. The diameter of the positive clamp is larger than the negative clamp.
Recent Comments